If you only see your students once a week, preserving clay projects between classes can present some major challenges. If you’re in this situation, you may want to consider planning a few one-day clay projects, especially for your very youngest students.
Today I’m sharing a foolproof one-day project that can even be done if you teach from a cart – slam molds!
Yes, you read that right- not slump molds, slam molds! The process is essentially the same as using a traditional slump mold with an extra exciting step. Instead of just draping the slab into the mold, the students SLAM it on the ground to force the clay into the mold. What kid doesn’t love slamming!?
Here are the steps:
1. Find Your Molds
A good slam mold has a few key characteristics; it isn’t breakable, it has a very basic shape, and it comes in a large quantity (because each kid’s project needs to dry to leather hard while still in the mold). Therefore, Styrofoam® trays are a natural choice.
You could solicit donations, contact a local meat market, or buy them from Amazon. The finished piece is more impressive if it has a little depth, so I recommend hunting for trays that are at least a half inch deep. (The pictures in this article show a set of 5.25-inch square trays that are .88-inch high… yup, from Amazon).
2. Roll Your Slabs
Whether you have rolling pins or a slab roller, the first step is to have your students roll out semi-uniform slabs. Then, students need to cut out shapes that are slightly larger than the mold itself.
Explain that this extra clay will be needed to form the sides of the piece, as the clay is slammed into the mold.
3. Decorate Your Slabs
You can use a variety of decorative techniques. Use texture plates or objects to press into the clay, have kids carve into the surface, or even use alphabet pasta as a way to incorporate text. Don’t worry, it burns off in the firing process!
It’s SLAM Time!
Prepare yourself for organized chaos, because it is time to slam the clay… and your students are going to think it is hysterical. Come on, you are throwing art on the ground or the desk! Have your students drape the clay over the mold and drop it from a small height. You will need to practice this to determine what height is going to work for your kids. I dropped mine from approximately 24 inches for this project. A lot of factors can affect how the artwork falls. Be prepared for a few misfires. I think it’s better to drop it from a lower height repeatedly, to ensure success, but that’s a little less dramatic and exciting.